Welcome to Premium Paper Help

premiumpaperhelp.com logo

Our Services

Get 15% Discount on your First Order

DHCP assigment with packet tracer, need help completing the assignment.  Introduction to Routing and Switching Week 2 Guided Practice:

DHCP assigment with packet tracer, need help completing the assignment. 

Introduction to Routing and Switching Week 2 Guided Practice: DHCP

Objective

In this Guided Practice you will be connecting and configuring a small subnetted network with multiple routers.

Technology

You will use Packet Tracer in this practice. Anytime you see a 50 in an IP address replace with your assigned number.

Task 1 – Configuring DHCP

You will start with the network you previously connected and configured in the VLSM Guided Practice. Notice the labeling of the VLANs and network addresses below. Make sure to make similar labels to your network before moving to the next step.

In week 1 you configured DCHP pools on a router. A more common way to configure DCHP on a network is to have DCHP pools configured on a server. Follow the steps below to configure DHCP pools on Server1 of your network. Your PCs and Wi-Fi Router will use DCHP and the servers will both have static IP addresses.

Reference the previous Guided Practice for any IP addressing information that you may need.

Assign Server1 and Server2 static IP addresses. As a reminder, use your assigned number for the third octet where 50 is used for instructional purposes.

Double click on Server1 and under Services at the top click DHCP on the left.

You will now begin to add the DHCP pools for your PCs and the Wi-Fi Router . Under Interface at the top click On for Service.

Start by adding the first DCHP pool that PC1 will use. Once you fill in the information click on Add at the bottom. You will then see the PC1 DCHP pool at the bottom of the screen.

Continue creating the other four DCHP pools using the same steps as above. Take a screenshot.

Next we need to tell the R1 and R3 routers where these DCHP pools are located. Console into the R3 router. We will add the ip helper command to our four sub-interfaces. This will tell the router where to go to for a DHCP request.

Verify your PCs all receive IP addresses via DCHP. Take a screenshot of each.

Deliverables for Task 1

· Screenshot of your DCHP pools on Server1.

· Screenshot of your PCs with IP addresses via DHCP.


Task 2 – Configuring SSH and Telnet


You will now set up SSH and Telnet communications on your routers. This is the typical way network administrators set up their systems so they can communicate to each router from a central location. Otherwise you will need to physically travel to each router with your laptop and a console cable.

You will set up SSH for communications across the network. You will need to do the following for the R1, R2 and R3 routers on your network. Below is an example for the R1 router.

1. Create a secret password on the R1 router.

2. Create a domain and logon username.

3. Now we are going to create the crypto key for the SSH session.

4. Now enable SSH version 2, set time out duration and login attempt time on the router.

5. Enable VTY lines and configure access protocols.



Testing Connectivity

Ping from PC2 to the R2 router. Take a screenshot.

Let’s now SSH from PC2 to the R2 router from the same command prompt. You will use class for the first password and hit enter. Then type enable and enter then cisco for the second password. You will now enter the R2 router. Take a screenshot. Go ahead and SSH to the R1 and R3 routers as well and take screenshots like the one below for the R1 router.

Next we will Telnet from PC4 to the R1 router. The sequence is similar to SSH, see example below. Open a command prompt and type telnet 192.168.___.241. Your username and passwords are the same as you used for SSH. Take a screenshot. Go ahead and Telnet to the R2 and R3 routers as well and take screenshots like the one below for the R1 router.


What are some differences between SSH and Telnet? Why should you use SSH and not Telnet?


Deliverables for Task 2

· Screenshot of ping from PC2 to the R2 router.

· Screenshot of SSH and Telnet to each router on the network.

· Answer the questions about Telnet vs SSH: What are some differences between SSH and Telnet? Why should you use SSH and not Telnet

Task 3 – DNS

In this task you will be using DNS that is configured on the Internet Server where there are three DNS a records configured.

What is a DNS A record? The “A” stands for “address” and this is the most fundamental type of DNS record: 
it indicates the IP address of a given domain. For example, if you pull the DNS records of cloudflare.com, the A record currently returns an IP address of: 104.17. 210.9. A records only hold IPv4 addresses.

Double click on the Internet server and under Services at the top click on DNS.

You will see three different A records- we will use server.com.

Go to PC4 and open a command prompt. Ping 11.1.1.10 and then server.com. Take screenshots. Finally bring up a Web Browser and put server.com in the URL box. Take a screenshot.


Deliverables for Task 3

· Screenshot of ping from PC4 to 11.1.1.10

· Screenshot of ping from PC4 to server.com

· Screenshot of Web Browser using server.com

image3.png

image4.png

image5.png

image6.png

image7.png

image8.png

image9.png

image10.png

image11.png

image12.png

image13.png

image14.png

image15.png

image16.png

image17.png

image18.png

image19.png

image20.png

image21.png

image22.png

image23.png

image24.png

image25.png

image1.png

image2.png

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Related Questions

Product Constellation Assignment   Below are the details for your Product Constellation assignment.   Overview   Product constellations are clusters of

Product Constellation Assignment   Below are the details for your Product Constellation assignment.   Overview   Product constellations are clusters of   complementary products, specific brands, and/or   consumption activities. They are usually centered   around a main purchase or major life stage event.   The purpose of this assignment

2/25/24, Undergraduate Discussion Rubric – BUS-210-Q3548 Managing/Leading in Business 24EW3 Page 1 of 3 Undergraduate Discussion Rubric Undergraduate

2/25/24, Undergraduate Discussion Rubric – BUS-210-Q3548 Managing/Leading in Business 24EW3 Page 1 of 3 Undergraduate Discussion Rubric Undergraduate Discussion Rubric Overview Your active participation in the discussions is essential to your overall success this term. Discussion questions will help you make meaningful connections between the course content and the larger

Outline for Leadership Development Plan One way to develop leaders within your organization is to create individual Leadership Development Plans for your

Outline for Leadership Development Plan One way to develop leaders within your organization is to create individual Leadership Development Plans for your emerging leaders. Use the sample development plan provided in the Learning Activity entitled Developing a Leadership Development Plan as a guide for completing this formative assessment. Using the

INFORMATION BELOW  Instructions

INFORMATION BELOW  Instructions scroll to How Self Efficacy Beliefs Are Created  Describe how each of the four sources has affected your life now and in the past.  The sources are: Mastery Experience Vicarious Experience Social Influences Somatic Influences Be detailed….this is a major assignment.  Write at least a full paragraph on

Problem Set #7 Attached Files: ·  Building a Model – Marvel

Problem Set #7 Attached Files: ·  Building a Model – Marvel Renovations.xlsx  (18.835 KB) Start with the partial model in the file attached. Marvel Pence, CEO of Marvel’s Renovations, a custom building and repair company, is preparing documentation for a line of credit request from his commercial banker. Among the

 In your new role as comptroller of the hospital, your CFO has asked you to prepare a financial analysis by evaluating a medical supply company,

 In your new role as comptroller of the hospital, your CFO has asked you to prepare a financial analysis by evaluating a medical supply company, Hillside, Inc., that the hospital is considering purchasing. You will use its balance sheet and income statement to calculate several financial ratios. You’ll demonstrate your financial analysis skills and

Research Paper Part 1 Post ideas of fraud for approval PART 2 1.

Research Paper Part 1 Post ideas of fraud for approval PART 2 1. Imagine your intent is to make as much money as you can by committing fraud. Give a detailed description of how you would commit this fraud e.g.  individuals, companies and departments involved and impacted by your fraud