Welcome to Premium Paper Help

I just someone to check my work, i have already done all of them but there is missing stuff i didn’t solve  FOR Lab one  what i want  On page 7i need Part

I just someone to check my work, i have already done all of them but there is missing stuff i didn’t solve 

FOR Lab one 

what i want 

On page 7i need Part A : single melting point determination of unknown sample  Table 

Page 8 all page, page 9all pages, page 10nothing.

And check every thing i solve

Experiment 1 Melting Point Observations

********************************************

Appearance of Unknown 350-1-A-1 -dull white powder

Appearance of Unknown 350-1-B-1 -dull white powder

Part A

packing of tube accomplished using a drop tube.

Amount of compound in melting point (mp) tube = 1 mm

Observations during mp = (see lab manual for a time lapse of step observed)

Temperatures recorded = 68.2-69.1 C

Part B

50:50 mixture created and mixed by mortar and pestle -dull white powder

packing of tube accomplished using a drop tube.

Amount of compound in mp tubes = 1 mm

Observations during mp = (see lab manual for recording of the time lapse of step observed)

Temperatures recorded = 1.B.1 alone = 106.1-106.8 C

mixed mp of 1.B.1 mixed with 4-nitrobenzaldehyde = 106.1-106.8 C

mixed mp of 1.B.1 mixed with 2-methylbenzoic acid = 93.0 – 98.5 C

therefore 1.B.1 id is 4-nitrobenzaldehyde

Experiment 2 Recrystallization Observations

***********************************************

pages 14, 15, 16, 17 

and check the rest of the pages if i solve it right

and check everything i solve

Appearance of Impure Acetanilide? -dull white powder with some dark flecks

Amt weighed = 5.00g

Appearance of solvent selected = distilled water = clear and colorless

Volume of solvent used to dissolve the impure acetanilide = 50 mL

Appearance before charcoal addition = clear/colorless solution with white pptte on bottom of flask

Appearance after charcoal addition = clear/colorless solution with black charcoal powder throughout

and white pptte on bottom of flask

Appearance after gravity filtration = black charcoal powder on filter paper, filtrate = clear and

colorless

Appearance after cool down = crystals formed after 5 minutes, white shiny flakes growing in flask

Appearance of final purified acetanilide – white shiny flakes

Yield of final purified acetanilide = 2.98 g

mp of final purified acetanilide = 113-3-114.0 C

mixed mp of purified acetanilide + mp standard = 113-114 C.

Experiment 3 Distillation Observations

**********************************

pages 21,22,23,24 

 there a missing stuff i didn’t solve 

and i want you to check all my work

-uncalibrated thermometer used throughout for all temp. readings

Part A Simple Distillation

Appearance of Impure cyclohexanol? -clear and colorless liquid

Amt weighed/measured = 20.0 mL

Appearance of forerun = clear/colorless solution

Volume of forerun = 6.2 mL

Obs. bp range for forerun = 78 C – 138C (first drop at 78C)

Appearance of product = clear/colorless solution

Yield of final purified cyclohexanol = 13 mL

Obs. bp range of final purified cyclohexanol = 140 C – 155 C

bp of final purified cyclohexanol = 155 C (observed temp at which bp was constant

distillation rate = 1 drop per second, slowing to 1 drop per 3 sec towards the end

Part B Fractional Distillation

Appearance of 50:50 cyclohexene/toluene mixture? -clear and colorless liquid

Amt weighed/measured = 25.0 mL

Appearance of forerun = clear/colorless solution

Volume of forerun = 0.0 mL (no forerun collected)

Obs. bp range for forerun = NA

Appearance of Fraction 1 = clear/colorless solution

Yield of Fraction 1 = 7.3 mL

bp range of Fraction 1= 77 C-83 C

distillation rate = 1 drop per second

Appearance of Fraction 2 = clear/colorless solution

Yield of Fraction 2 = 10.3 mL

Obs. bp range of Fraction 2= 83 C -97 C

distillation rate = 1 drop per second

Appearance of Fraction 3 = clear/colorless solution

Yield of Fraction 3 = 5.5 mL

Obs. bp range of Fraction 3= 97 C -110 C

distillation rate = 1 drop per second

Appearance of Residual in Distilling Flask = clear/colorless solution

Yield of Residual= ~2.0 mL

**the biggest thing to remember to do for this experiment is to do the Barometric Pressure

temperature correction on all your observed boiling point readings. The equation for correcting

the boiling point of a solution is:

corr.bp(C) = obs.bp(C) + ((760 mmHg -obs.BP mmHg)/10 mmHg) x 0.5 C)

where:

corr. = corrected

bp = boiling point

C = degrees Celsius

obs. = observed

BP = barometric pressure, in mm Hg (760 mmHg or torr = sea level pressure)

i.e., “for every 10 mmHg below 760 the BP is, you must correct by adding 0.5 C to the observed

bp.” So for instance, if the observed BP was 700 mmHg, this is 6 x 10 mmHg below 760, and

therefore you must add 6 x 0.5 C, or 3 C to the observed bp.

You need to do the correction for both the lower and upper limit of the bp range (it is the same

number that is added or subtracted from the observed value for both limits).

Please note that you may have any additional number for the actual bp. e.g., for cyclohexanol in

Part A of Exp.3, you may also have observed a particular temperature that was fairly constant

towards the end of the distillation…this is the boiling pt of cyclohexanol and it also needs to be

barom. press. corrected.

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Related Questions

Using MS WORD, you will provide a 400-level collegiate paper about a current event of your choice and that event’s tie-in to psychopathology. The focus of

Using MS WORD, you will provide a 400-level collegiate paper about a current event of your choice and that event’s tie-in to psychopathology. The focus of this assignment is to use & apply the text to a current event! Any news or event of your choice. ***YOUR PAPER will include three major components: A clear, concise overview discussion of

Description ‫المملكة العربية السعودية‬ ‫وزارة التعليم‬ ‫الجامعة السعودية اإللكترونية‬ Kingdom of Saudi Arabia Ministry of Education Saudi

Description ‫المملكة العربية السعودية‬ ‫وزارة التعليم‬ ‫الجامعة السعودية اإللكترونية‬ Kingdom of Saudi Arabia Ministry of Education Saudi Electronic University College of Administrative and Financial Sciences Assignment 3 MGT322 (2nd Term 2023-2024) Deadline: 04/05/2024 @ 23:59 Course Name: Logistics Management Course Code: MGT322 Student’s Name: Semester: 2nd CRN: Student’s ID Number:

Health History and Physical Assessment Instructions Criteria Health History Assessment (70 points possible/70% of total

Health History and Physical Assessment Instructions Criteria Health History Assessment (70 points possible/70% of total points available) Required criteria 1. Demographics 2. Perception of Health 3. Past Medical History 4. Family Medical History 5. Review of Systems 6. Developmental Considerations 7. Cultural Considerations 8. Psychosocial Considerations 9. Collaborative Resources Reflection

  Choose one of the  following general categories of psychological disorders: Anxiety  Disorders, Mood Disorders, or Dissociative Disorders. Research

  Choose one of the  following general categories of psychological disorders: Anxiety  Disorders, Mood Disorders, or Dissociative Disorders. Research and  briefly describe two different treatment approaches or therapies for  managing disorders within the chosen category. Focus on the rationale  behind each treatment and any evidence supporting its effectiveness. Be  sure